Skip to main content
NetApp Knowledge Base

MetroCluster adapter displays no disk shelves or ATTO bridges

Views:
81
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • Fabric MetroCluster
  • ONTAP 9

Issue

In the output of sysconfig -a there are no disks, shelves, or ATTO bridges displayed under one of the storage adapters
 
Example:
	slot 2: FC Host Adapter 2a (Emulex XE201 rev. 48, N-port, <UP>)
		Board name:        111-02451
		Serial Number:     0000000000
		Firmware rev:      12.0.378.1
		Host Port Id:      00000000
		FC Node Name:      2:000:000000:000000
		FC Port Name:      1:000:000000:000000
		SFP Vendor:        EMULEX
		SFP Part Number:   AFBR-57F5MZ-ELX
		SFP Serial Number: ABCDEFGHIJKL
		SFP Capabilities:  4, 8 or 16 Gbit
		Link Data Rate:    16 Gbit
		Switch Port:       Switch-B-1:1-1

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.