Skip to main content

NetApp_Insight_2020.png 

NetApp Knowledgebase

MetroCluster IP/iSCSI LIF is not using the expected interface on the partner cluster

Views:
54
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

ONTAP 9
MetroCluster

Issue

The network interface show output on each cluster reports that the home port for a LIF on a DR Vserver is not the same interface as that used on the source cluster for this Vserver.

clusterA::> network interface show
  (network interface show)
            Logical    Status     Network            Current       Current Is
Vserver     Interface  Admin/Oper Address/Mask       Node          Port    Home
----------- ---------- ---------- ------------------ ------------- ------- ----
vserver
            lif1         up/up    10.10.100.10/24    clusterA-01    e0c     true
            lif2         up/up    10.10.100.11/24    clusterA-02    e0d     true
            lif4         up/up    10.10.100.12/24    clusterA-02    vlan-11 true

                 
clusterB::> network interface show
  (network interface show)
            Logical    Status     Network            Current       Current Is
Vserver     Interface  Admin/Oper Address/Mask       Node          Port    Home
----------- ---------- ---------- ------------------ ------------- ------- ----                                        
vserver-mc
            lif1         up/down  10.10.100.10/24    clusterB-02   e0e     true
            lif2         up/down  10.10.100.11/24    clusterB-01   e0c     true
            lif4         up/down  10.10.100.12/24    clusterB-01   vlan-22 true

 

 

 

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support