Skip to main content
NetApp Knowledgebase

Fibre Channel adapter driver encountered error “disabling non-NetApp 8324 hardware”

  1. Last updated
  2. Save as PDF
Views:
38
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

 

Applies to

  • MetroCluster
  • FCVI
  • error message Fibre Channel adapter driver encountered error “disabling non-NetApp 8324 hardware” on boot
  • ha-config is not set to mcc or mcc2n

Description

During boot Ontap does not recognize the FCVI card and display the following error message
Oct 01 13:43:11 [localhost:fci.adpater.error.notice]: Fibre Channel adapter driver encountered error “disabling non-NetApp 8324 hardware” on adapter 1a
Oct 01 13:43:11 [localhost:fci.adpater.error.notice]: Fibre Channel adapter driver encountered error “disabling non-NetApp 8324 hardware” on adapter 1b