Failed to add Brocade switch to health monitoring using SNMPv3
Applies to
- Brocade FC Switch
- MetroCluster
- ONTAP 9
- SNMPv3
Issue
A MetroCluster backend switch can't be added to health monitoring using SNMPv3
The following errors are reported:
Failed to add a switch for SNMPv3 monitoring on node "node1" in cluster "clusterA" Reason: Failed to check if device located at "10.20.30.40" is from a supported vendor.
Error: command failed: Internal error. Failed to add switch for monitoring on node "nodename" in cluster "clustername". Reason: Failed to check if device located at "switchipaddress" is from supported vendor. For further assistance, contact technical support.