Skip to main content
NetApp Knowledge Base

DR CONFIG REPLICATION FAILED - Error: Cannot find ports in IPspace

Views:
415
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • MetroCluster
  • ONTAP 9
  • Config Replication Service (CRS)

Issue

  • Autosupport triggers DR CONFIG REPLICATION FAILED error:

HA Group Notification (DR CONFIG REPLICATION FAILED) ERROR

  • Event logs report the following errors:

[Node-01: san.NoPortsInIpspace:error]: Cannot find ports in IPspace "IPSpace01" on Node "Node-01" for placing LIF "LIF-01" in Vserver "SVM01-mc""

[Node-01: crs: callhome.dr.apply.failed:error]: Call home for DR CONFIG REPLICATION FAILED

  • The output of metrocluster vserver show or METROCLUSTER-VSERVER.XML section in the ASUP displays an error similar to the below on one or more of the vservers:

Example:

Unrecoverable error during configuration replication, requires manual intervention.
Error: There are no active ports in IPspace "IPSpace01" on Node "Node01" for placing LIF "LIF-01" in Vserver "SVM01-mc".

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.