Skip to main content
NetApp Knowledge Base

Checksum Errors on MetroCluster IP remote plex

  1. Last updated
  2. Save as PDF
Views:
551
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

Issue

  • CHECKSUM ERROR (multiple disks) AutoSupports triggered during scrubs.
  • Checkum errors ONLY observed in EMS for a remote plexes. Example:

Sat Sep 04 01:14:17 -0500 [node-01: raidio_thread: raid_rg_readerr_repair_cksum_error_1:notice]: params: {'disk_rpm': 'N/A', 'vendor': 'NETAPP  ', 'firmware_revision': 'NA54', 'shelf': '51', 'disk_info': 'Disk /aggr1_node_01/plex1/rg0/0m.i1.7L60P1 Shelf 51 Bay 3 [NETAPP   X357_SLNGE3T8ATE NA54] S/N [ABC01A1234567]

  • No hardware errors found, related to disks, shelves, cables, HBAs, etc. 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.