Skip to main content
NetApp Knowledge Base

Brocade switch software Fault Kernel Panic

Views:
1,738
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • Brocade switches
  • SAN

Issue

  • Brocade switch rebooted unexpectedly, or is not reachable
  • Command errdump -a is reporting following:

Brocade6505, Processor rebooted - Software Fault:Kernel Panic
2023/12/31-23:03:00 (IST), [HAM-1004], 1695212, SLOT 2 | CHASSIS, INFO, switch, Processor rebooted - Software Fault:Kernel Panic.
2023/12/31-23:02:25 (IST), [EM-1033], 1695145, SLOT 1 | CHASSIS, ERROR, switch, CP in Slot 2 set to faulty because CP ERROR asserted.
2023/12/31-23:02:25 (IST), [EM-1047], 1695146, SLOT 1 | CHASSIS, INFO, switch, CP in slot 2 not faulty, CP ERROR deasserted.
2023/12/31-23:01:44 (IST), [FSSM-1003], 1695133, SLOT 1 | CHASSIS, WARNING, switch, HA State out of sync.
2023/12/31-23:01:47 (IST), [ESM-3000], 1695134, SLOT 1 | FID 128, INFO, switch, Warm Recovery starting.
2023/12/31-23:01:47 (IST), [ESM-3001], 1695135, SLOT 1 | FID 128, INFO, switch, Warm Recovery complete.

  • Also observed below FCPH related errors.

2023/12/31-23:02:41:88xx01 (IST), [FCPH-1014], 188xx45/1695209, SLOT 1 | FID 128, WARNING, switch, FC Protocol Error: INVALID SEQ ID - fc(0) port=330 iu=0x7cxxxc0 nfr=1 tp=0x20 fctl=0x290xxx seqid=0 seqc=0 xid=0x8c2e oxrxid=0x100xxxff sid=0x66c2c1 did=0xffxxxc, OID:0x410xcxc0, SPOID:0x410xxx00, input.c, line: 2471, comp:SWITCH_0, ltime:2023/12/31-23:02:41:88xxx2
2023/12/31-23:02:43:07xx97 (IST), [FCPH-1014], 188xx46/1695210, SLOT 1 | FID 128, WARNING, switch, FC Protocol Error: INVALID SEQ ID - fc(0) port=346 iu=0x781xxx40 nfr=1 tp=0x20 fctl=0x290xxx seqid=0 seqc=0 xid=0x803d oxrxid=0x100xxxff sid=0x66d2c2 did=0xffxxc, OID:0x410xcxc0, SPOID:0x410xxx00, input.c, line: 2471, comp:SWITCH_0, ltime:2023/12/31-23:02:43:073xxx

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.