Skip to main content
NetApp Knowledge Base

Can DFM be used to monitor maxdirsize is reached events?

Views:
269
Visibility:
Public
Votes:
2
Category:
oncommand-unified-manager-core-package
Specialty:
legacy
Last Updated:

Applies to

  • OnCommand Unified Manager Core Package 5.x
  • Data ONTAP 7-Mode

Answer

DFM has the events:

  • maxdirsize-limit-nearly-reached
  • maxdirsize-limit-reached

 

In order to alert on this, DFM needs to be configured as a traphost for the controller. When the event occurs in Ontap it will notify DFM via snmp which will generate the event.

 

To configure DFM as a traphost for the controller.

  1. controller> snmp traphost add <IP address of the DFM server>.
  2. controller> snmp init 1

 

You will then need to confirm an alarm based on the events.

Additional Information

What is maxdirsize?

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.