Skip to main content
NetApp Knowledge Base

DFM fails to collect performance data with error"Can't connect to host (err=10061)"

Views:
243
Visibility:
Public
Votes:
0
Category:
oncommand-unified-manager-core-package
Specialty:
legacy
Last Updated:

Applies to

  • OnCommand Core Unified Manager (DFM) 5.2.x
  • Data ONTAP 8 7-mode

Issue

DFM fails to collect performance data with error "Can't connect to host (err=10061)".

Example:

C:\Users\Administrator>dfm host diag 192.168.0.1

Network Connectivity
IP Address             192.168.0.1
Network                192.168.0.0/24 (last searched 25 三月 16:27)
DNS Aliases            Failed
DNS Addresses          Failed
SNMP Version in Use    SNMPv1
SNMPv1                 Passed (91 ms)
SNMP Community         public
SNMP sysName           FAS6240
SNMP sysObjectID       .1.3.6.1.4.1.789.2.3 (Clustered Filer)
SNMP productId         18xxxxxx
SNMPv3                 Passed (18 ms)
SNMPv3 Auth Protocol   MD5
SNMPv3 Privacy Enabled No
SNMPv3 Username        dfm
SNMP sysName           WNxxxxxx
SNMP sysObjectID       .1.3.6.1.4.1.789.2.3 (Clustered Filer)
SNMP productId         18xxxxxx
ICMP Echo              Passed (0 ms)
HTTP                   Passed (1004 ms)
NDMP (login not set)   Skipped
RSH                    Skipped (rshBinary is empty in global option)
SSH                    Passed (426 ms)
RLM                    Skipped (hostRLMAddress is empty)
XML (http port 80)     Can't connect to host (err=10061).

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.