Skip to main content
Data Infrastructure Management
- Last updated
-
-
Save as PDF
-
- Active IQ Unified Manager
- No image available
- "HTTP XML Authentication failed from xxx.xxx.xxx.xxx on storage controller" reported by OnCommand Unified Manager 5.x (DFM) due to invalid credentials
- 404 error with Active IQ Unified Manager
- 404 error with Unified Manager and WebUI not loading
- ActiveIQ UM cluster add fails because the MTU size does not match
- ActiveIQ UM fails to add a cluster due to a timeout reading the certificate
- ActiveIQ Unified Manager 9.6 not triggering events for EMS after port 514 is blocked on network
- The OnCommand Unified Manager performance database does not show all data in the sample_qos_workload_XxXx tables
- ActiveIQ Unified Manager failed inventory monitoring
- ActiveIQ Unified Manager install fails to start the services due to missing files
- ActiveIQ Unified Manager is unable to add a cluster using HTTPS
- ActiveIQ Unified Manager MySQL service cannot start, "The MySQL8 service on local computer started and then stopped"
- ActiveIQ Unified Manager MySQL service fails to start during install
- ActiveIQ Unified Manager returns "No data" on Capacity Volumes/Aggregates view
- ActiveIQ Unified Manager shows 0 (zero) for intercluster LIF activity
- ActiveIQ Unified Manager upgrade fails if the MySQL 8.0 Community repository is not installed
- ActiveIQ Unified Manager WebUI is unresponsive
- Active IQ Unified Manager "Permission Denied" error when trying to download a Support Bundle
- Active IQ Unified Manager CLI command to set the base DN does not work
- Active IQ Unified Manager disconnects intermittent
- Active IQ Unified Manager doesn't report CIFS Shares
- Active IQ Unified Manager erroneously displays "Authentication failed. Please verify Username and Password" for a Local User login in the webUI
- Active IQ Unified Manager error when attempting to setup Remote Authentication
- Active IQ Unified Manager fails for LDAP user login even though LDAP test succeeds
- Active IQ Unified Manager HTTPS certificate page does not open
- Active IQ Unified Manager in Chinese or Japanese returns fetching data source error in cluster data source page
- Active IQ Unified Manager log file fills up disk on Windows
- Active IQ Unified Manager reports Storage failover not possible: Unknown
- Active IQ Unified Manager sends unwanted alerts even after disabling the relevant alerting
- Active IQ Unified Manager service fails to start after upgrade from version 9.6 to 9.7
- Active IQ Unified Manager throws error "Resource-key not discovered" when managing a SnapMirror relationship
- Active IQ Unified Manager unavailable after Windows updates
- Active IQ Unified Manager upgrade failed "Failed to start MySQL Service Setup will terminate now!"
- Active IQ Unified Manager upgrade to 9.7 failed with "MySQL time out exceeded"
- Adding a cluster to ActiveIQ Unified Manager,Error received: The certificate has expired
- After upgrade to ActiveIQ Unified Manager 9.6+ events "Node Resources Over-utilized" are not generated
- AIQUM fails to display volume historical capacity charts due to scale issues
- AIQUM fails to expand the data disk with an error that e2fsck needs to run
- AIQUM shows "The cluster is not reachable" after polling is interrupted
- AIQ Unified Manager created an event destination in ONTAP, to non-routable interface on Unified Manager host
- Alert from Unified Manager: Cluster Not Reachable
- All CommVault AUX copies fail because of UM errors
- AutoSupport logs fail to send for Active IQ Unified Manager
- Auxcopies failing in CommVault due to indexing issues between CommVault and UM
- Cannot generate database backups in ActiveIQ Unified Manager 9.7
- Cannot log in to UM with "Authenticating token for ldap user not successful"
- Active IQ Unified Manager 9.7+ vCenter server acquisitions fail with the error: "The vCenter data cannot be processed"
- Cannot peer WFA with Unified Manager, error "cannot determine the unique ID of Unified Manager version from Workflow Automation host"
- Can Active IQ Unified Manager forward syslog messages?
- The cluster is not reachable in UM because the cluster certificate is expired or SSL is not enabled for the admin SVM
- Cluster monitoring doesn't work in OCUM after applying firewall rule in ONTAP
- Cluster monitoring fails in Active IQ Unified Manager where it had worked on previous polling cycles
- Configuring user quota email for users if user name is different than email address
- DFM: cannot connect to server when trying to login to webUI
- Drive LEDs on Solidfire nodes using the Dell R620 platform are dim or dark
- ElasticSearch indexing failures cause performance issues in OnCommand Insight
- Error Importing SSL certificate : Not an X.509 Certificate
- Expert Recommended KB Articles for Oncommand Unified Manager (6x/7x/9x)
- Failed to add a cluster to OCUM because the datasourceID = -1
- Failed to add the cluster to OCUM because the cluster is still present in table netapp_model.cluster
- Failed to fetch the HTTPS certificate error due to ONTAP firewall when adding cluster to ActiveIQ Unified Manager
- Failed to login to UM because the certificate in UM is regenerated
- Failed to set networking configuration on ActiveIQ UM 9.7 because the hostname contains a dot
- Failed to upgrade or install VMware Tools for OnCommandUnifiedManager
- Active IQ Unified Manager fails to add ONTAP cluster due to a breach of max number of EMS notification destinations
- False high Node Utilization on Unified Manager due to wrong performance counters received from ONTAP
- GUI problem Metrocluster Connectivity in Unified Manager
- How to access ActiveIQ Unified Manager Virtual Machine (OVA) DIAG shell
- How to backup and restore using OnCommand Unified Manager
- How to capture a packet trace using NETSH instead of Wireshark
- How to change language for Unified Manager graphical user interface and documentation on browser
- How to check Debian version on Unified Manager Virtual Machine
- How to check for TLS version on OnCommand Unified Manager
- How to Collect Logs (Support Bundle) from Active IQ Unified Manager on a vApp/OVA
- How to collect logs for OnCommand Workflow Automation 4.x troubleshooting
- How to collect logs for OnCommand Workflow Automation 5.x troubleshooting
- How to consolidate Active IQ Unified Manager from UM 9.7P1 version and later
- How to create an email notification upon volume autogrow success or failure
- How to disable ActiveIQ Platform Events on ActiveIQ Unified Manager 9.7+
- How to disable the general log file of MySQL on Windows
- How to disable TLS versions in Active IQ Unified Manager
- How to get ActiveIQ Unified Manager to notify on FC link down or pulled cable
- How to identify which ONTAP Cluster Events can be used as alerts in Active IQ Unified Manager based on Event Severity
- How to prevent Unified Manager from reporting "Port Status Down" event for unconnected/unused network ports
- How to properly stop/start Unified Manager services
- How to set system date and time manually in Active IQ Unified Manager virtual appliance
- How to stop alerts related to Obsolete/Resolved events in OnCommand Unified Manager
- How to stop only ocieau service in Active IQ Unified Manager 9.6
- HTTP 500 error reported when attempting to use the web interface of OnCommand Unified Manager
- What do I need to install tcpdump on ActiveIQ Unified Manager 9.7 OVA Virtual Machine?
- IOPS and Latency data from VMware vCenter not available on ActiveIQ Unified Manager due to duplicate uuids
- IOPS and Latency data from VMware vCenter not available on ActiveIQ Unified Manager due to identical ip addresses
- Is it possible to gain value that is equivalent to volume latency on Unified Manager by using ONTAP CLI or SNMP?
- Japanese Active IQ Unified Manager fails to add user
- Login to Unified Manager fails with the error 'Response doesn't have any valid assertion which would pass subject validation administrator'
- Login to Active IQ Unified Manager using remote authentication fails even though the remote authentication test passed
- MetroCluster monitoring failed in Unified Manager 7.2 with Reason: An internal error has occurred during MetroCluster component refresh due to hex values to the "Reason for Last Reboot" field
- MySQL fails to start when ActiveIQ Unified Manager is reverted from a newer version to an older version
- NetApp AIQ Unified Manager service doesn't start after upgrade because of corrupted files
- Unified Manager OVA/vApp database backup creation fails with the message: "Copying a file or directory is failed due to a file system error"
- No alerts are sent by ActiveIQ Unified Manager because of memory limitation
- No volumes are shown in the performance pages of Unified Manager when there is more than one QoS workload per volume
- OCSM: Cannot create LUN when choosing template of 'non VmWare'
- OCUM: Unified Manager does not show volume and aggregate trend graphs
- OCUM 9.5 installation fails due to "Failed to start MySQL service Setup will terminate now!!!"
- OCUM : Cannot modify the schedule of reports
- OCUM : LDAPs authentication fails due to sha-1 certificate
- OCUM : Post upgrades scheduled reports are not shown
- OCUM : SnapMirror not updating on destination after node panic
- OnCommand Unified Manager might receive an error when attempting to run canned reports due to ActiveX filtering being enabled
- OnCommand Unified Manager or OnCommand Performance Manager failed collecting performance for ONTAP 8.3 and later
- MetroCluster cluster monitoring failed in OnCommand Unified Manager with error: "Unexpected HTTP response code received for storage-bridge-get-iter"
- OnCommand Insight ElasticSearch service fails to start with an 'AccessDenied' exception
- OnCommand Plug-in for Microsoft reports false LUN Average Latency Monitor alerts
- OnCommand Unified Manager Alerts on disk-shelf-path-failure
- OnCommand Unified Manager dashboard gear menu is non-functional
- OnCommand Unified Manager did not send expected alerts
- OnCommand Unified Manager displays wrong latency value on breakdown graph
- OnCommand Unified Manager does not update performance graphs because ONTAP root volume ran out of space
- OnCommand Unified Manager fails to restore file with error "Invalid output from the cluster"
- OnCommand Unified Manager keeps sending alerts after problem is already solved
- OnCommand Unified Manager might receive an error when attempting to run canned reports using Internet Explorer 11
- OnCommand Unified Manager on Virtual Machines running slow or hanging
- OnCommand Unified Manager performance collection fails because cluster nodes are not configured with the same time
- OnCommand Unified Manager performance collection fails because the cluster certificate is expired
- OnCommand Unified Manager performance collection fails because the cluster is not reachable
- OnCommand Unified Manager performance collection fails because the cluster node is busy
- OnCommand Unified Manager performance collection fails because the web service is not enabled
- OnCommand Unified Manager reports a Multipath HA issue while controllers in the cluster reports no issue
- OnCommand Unified Manager services on Windows installations might fail to start after an upgrade
- OnCommand Unified Manager shows Quota Set "No" and "Not Applicable" in qtree list in SVM page
- OnCommand Unified Manager unable to communicate with authentication server when setting up an LDAP connection
- ONTAP EMS Event Subscriptions in OCUM fails with Error:"java.lang.NullPointerException"
- File restore operations in Active IQ Unified Manager fail with the error 'The operation is not supported because NDMP Vserver-aware mode is disabled.
- Performance archive collection fails in OCUM/AIQUM, because node root volume is not properly mounted on VLDB and WAFL
- Performance archive collection fails in OCUM/AIQUM, because the root volume of one node is mounted on another node
- Performance data migration to Unified Manager fails due to missing table partitions
- Quota email rules are not working in AIQ UM, when unix and windows users are mapped together
- Remote authentication over SSL fails with "Error reading the SSL certificate" message in AIQUM
- Renamed nodes within a cluster are no longer reflecting inventory or performance data in OnCommand Unified Manager 7.2
- Services don't start after upgrade to ActiveIQ Unified Manager 9.7 OVA, because of java library error
- Storage controller host discovery is failing within OnCommand Unified Manager/ ActiveIQ Unified Manager
- Supportability for Security Measures applied to Active IQ Unified Manager for Clustered Data ONTAP
- The cluster is not reachable in UM after adding intercluster LIFs to the cluster
- The cluster is not reachable in UM because acquisition service ocieau has run out of memory
- The cluster is not reachable in UM because the cluster Web services are in a bad state
- Active IQ Unified Manager displays : The network LIF of the vCenter corresponds to multiple ONTAP LIFs with identical IP addresses
- The refresh button is missing on the event page in the OnCommand Active IQ Unified Manager
- The warning 'Volume days until full' generated by ActiveIQ UM is not genuine
- Top 10 OnCommand Unified Manager for clustered Ontap 6.x/7.x/9.x issues and Solutions
- MetroCluster monitoring failed in Unified Manager 7.2 with Reason: An internal error has occurred during MetroCluster component refresh due to a failed poll with null exception
- MetroCluster monitoring failed in Unified Manager 7.2 with Reason: An internal error has occurred during MetroCluster component refresh due to stale (moved) bridges in DB
- MetroCluster monitoring failed in Unified Manager 7.2 with Reason: An internal error has occurred during MetroCluster component refresh post re-cabling at switch ports
- ActiveIQ Unified Manager 9.7RC1 cannot monitor vCenter with error "Discovery failed, the vCenter data cannot be processed"
- UM fails to monitor a MCC cluster after removing nodes from the setup
- UM is unable to add Cloud Ontap clusters behind an Elastic Load Balancer (ELB) for Amazon Web Services (AWS)
- UM is unable to delete Cloud Ontap clusters behind an Elastic Load Balancer (ELB) for AWS
- Unified Manager is unable to update Cluster user and drops Cluster history after updating the Cluster password within Unified Manager WebUI
- Active IQ Unified Manager might receive an error when attempting to run canned reports due to a missing temporary file
- OnCommand Unified Manager might receive an error when attempting to run canned reports due to insuffisant ressources
- Active IQ Unified Manager reports "MTU On Cluster Ports Should Be Set To 9000 Bytes" for ONTAP Select deployments
- Unable to access Active IQ Unifited Manager with Active directory
- Unable to access OnCommand/ActiveIQ Unified Manager after upgrade in Red Hat/CentOS based servers
- Unable to add a cluster in Active IQ Unified Manager due to network connectivity issues
- Unable to add cluster to OnCommand Unified Manager or Active IQ Unified Manager
- Unable to communicate with the authentication server due to the following reasons: Client truststore is empty
- Unable to increase the data disk on Active IQ Unified Manager in vApp
- Unable to provision new volumes for existing subclients in Commvault/SnapProtect when the destination volume has been deleted
- Unified Manager 7.2x data migration fails Exception: unexpected end of stream
- Unified Manager : What are the notable log files and their respective locations ?
- Unified Manager adds subfolder on NDMP in-place restore
- Unified Manager cluster monitoring fails because of keycache
- Unified Manager deduplication savings statistics not available for volumes
- Unified Manager does not collect the last 15 days of performance data after install or upgrade
- Unified Manager hangs at the boot screen after upgrade
- Unified Manager has a repeating error that a Protection Job Failed but the snapmirror is updated correctly
- Unified Manager MCC monitoring fails due to bridge discovery
- Unified Manager MySQL bin logs are occupying so much space that the UM backup starts failing
- Unified Manager MySQL error file contains warning "... row size is 8127, which is greater than maximum allowed size (8126)..."
- Unified Manager secure connection fails to LDAP server
- Unified Manager unable connecting to server using SSL/TLS
- Active IQ Unified Manager 9.7 upgrade failed due to error in mysql error file "Data Dictionary initialization failed"
- VMware Tools is not installed after upgrading ActiveIQ Unified Manager Virtual Machine (OVA)
- What are ActiveIQ Unified Manager’s recording files and how to we parse them for troubleshooting?
- What is Performance Budgeting?
- Where can I find support for Grafana?
- Where do I report an issue with Active IQ?
- Why "LUN Offline" event is not generated in the OnCommand Unified Manager?
- Why do the PCU charts show a decrease in values after upgrading to AIQUM 9.7?
- Why is there no data present in the table netapp_model_view.snapshot within Active IQ Unified Manager
- Windows ActiveIQ UM upgrade to 9.7 fails because the jboss user does not have the correct permissions set
- Wrong PDF report is attached to Unified Manager report email
- E-Series SANtricity Management Software
- No image available
- OnCommand Suite
- No image available
- The alert: "aggregate RAID status is degraded because of broken disks" is reported from OnCommand Unified Manager for Clustered ONTAP
- "Index 0 out of bounds for length 0" message seen when adding SolidFire cluster in WFA 5.1
- 'Read timed out Error' while trying to poll for the HDS HCP datasource in the OnCommand Insight server
- 'Too many open files' error in oci-cluster.log of elasticsearch
- Acquisition server does not stay started on Oncommand Unified Manager 9.5 on RHEL 7.x or OVA
- ActiveIQ Unified Manager *.war and/or *.ear files do not deploy correctly
- ActiveIQ Unified Manager users forced to log out of UI and Cluster monitoring fails
- Active IQ Unified Manager Alert: High Node Utilization Fragmentation
- Active IQ Unified Manager server status "not running"
- AD authentication fails or takes long time in ActiveIQ Unified Manager
- After an upgrade to WFA 5.1 the custom data source cannot find CSV file
- After a Microsoft Windows Server update, IBM Cognos reporting tool shows Error:"Context Root Not Found"
- After starting the OnCommand Insight Data Warehouse installation, it gets re-attempted for around 10 minutes and fails with no details in the error shown
- After upgrade to WFA 5.1 RC1 the authentication over LDAP does not work anymore
- After upgrading OnCommand Insight (OCI), Insight Data Warehouse (DWH) connector fails when connecting to OCI server
- After upgrading OnCommand Workflow Automation to 5.1 from 4.2, workflows fail to run
- Annotations defined in the rules are not assigned to assets in the OCI
- Antivirus Scanning Software can cause Database corruption within OnCommand Unified Manager
- API Services to Unified Manager 9.7 REST API mapping
- Attempts to add a cluster in OnCommand Workflow Automation results in error "Credential with expired certificate is not testable."
- Authentication failure occurs when connecting to an ONTAP cluster via Commvault Array Management
- A volume shows no performance data for a single volume viewed in OnCommand Insight
- Blocked ports cause OnCommand Insight (OCI) Data Warehouse (DWH) connector to fail when connecting to OCI server
- Brocade discovery with OnCommand Insight (OCI)
- By importing OSSV baseline in UM 5.2.x a new baseline attempt
- Cannot add E-Series or EF-series controller in OCI
- Cluster monitoring failed in OnCommand Unified Manager with error: Cannot update server "com.netapp.oci.server.UpdateTaskException 68-132-983"
- Can DFM be used to monitor maxdirsize is reached events?
- Can OCUM be used to monitor maxdirszie being reached?
- Can you restore a backup from a previous version in OnCommand Insight?
- Certain ONTAP data sources fail after upgrading OnCommand Insight to SP8
- Clustered Data ONTAP data source is stuck in "In Progress" Operation State in Unified Manager
- Cluster added to OnCommand Unified Manager is stuck in discovery state due to vserver peering relationship's Peer State being stuck in an initializing state
- Cluster monitoring failed in OnCommand Unified Manager with internal error: expected one element but was
- Common EMC Solutions Enabler error messages logged by OCI
- Configuring Active Directory authentication in OnCommand Workflow Automation fails
- Connector failed to connect from OnCommand Insight Data Warehouse(DWH) to OnCommand Insight(OCI) server
- OnCommand Workflow Automation Installation Failure - Could not verify schema validation Success or Failure even after 900 seconds
- Data collection for all data sources in OnCommand Insight does not work after server ran into a disk-nearly-full condition
- Data source object refresh is failing with "Unable to invoke AU EJB" error
- Data Warehouse "Informix" service fails to start after a Windows reboot
- OnCommand Insight Data Warehouse (7.3.3, 7.3.4) Jobs show Skipped Build, or WebUI becomes unavailable due to Wildfly Scheduler issue
- Data Warehouse version 7.3.10 install fails with error "provided domain user 'name' could not be found"
- What is the relationship between DFM, OnCommand Unified Manager Core, Performance Advisor, Protection Manager, NetApp Management Console, etc?
- Discrepancy between OnCommand Insight server and ONTAP command line interface in LUN latency
- Does OnCommand Insight require Java to be installed outside of the application?
- Does OnCommand System Manager 3.x supports non Oracle Java?
- DWH reports are not able to display IOPs for some aggregates
- Error: (offbox) OnCommand System Manager is accessed by another client and is locked to a single client for security reasons
- Error 'UDA-SQL-0191' when trying to create a custom report with the package 'Storage and Storage Pool Capacity' in DWH Cognos
- OnCommand Unified Manager backup failing with "Error Occured while creating backup archive /data/ocum-backup/databasedumps-repo/ocum_mysql_full_backup.sql.7z"
- Error when opening ActiveIQ Unified Manager Excel report: The file format and extension of "filename" don't match
- OnCommand Data Warehouse ETL fails and user is unable to access the ‘Connectors’ window due to DWH password encryption file mis-match
- ETL fails for connector in OnCommand Insight Data Warehouse, with error "The table 'X' is full"
- Expert Recommended - ActiveIQ Unified Manager does not Update Performance Data from Ontap Clusters
- Failed to instantiate data source message seen while testing OnCommand Insight data source
- Failed to login to NetApp ONTAP System Manager with a custom role after an upgrade to ONTAP 9.7
- Failed to restore database backup in OnCommand Workflow Automation
- For some LPARs there are no Storage resources associated for vscsi disks in OnCommand Insight for the PowerVM datasource
- Gaps in Performance Data are being reflected in Oncommand Unified Manager when nodes in a cluster are running different ONTAP versions
- Gaps in the performance graphs while polling for the EMC datasource in OnCommand Insight server
- HDS data source performance collection fails intermittently in OCI
- How and where we are collecting the QoS wait time field in OCI
- How DFM is affected when Adobe Flash goes end of life in December 2020
- How does OnCommand Unified Manager (DFM) aggregate overcommitted Calculation work?
- How do Full Backup and Incremental Backup Schedules work in ActiveIQ Unified Manager 9.7 and later?
- How do OnCommand Unified Manager incremental backups work?
- How do you edit the credentials for an OnCommand Unified Manager cluster data source via command line on a RHEL or vApp installation?
- How to access MySQL within all ActiveIQ Unified Manager platforms
- How to allow OPM to add a cluster that was previously managed by a different OPM instance
- How to apply a patch in OnCommand Insight 7.x
- How to backup the OnCommand Core Unified Manager (DFM) database or restore the database from a previous backup
- How to change the flow control and MTU settings on physical interfaces with minimum disruption in a production environment
- How to change the SMTP server in OnCommand Unified Manager 5.x and later
- How to collect an OnCommand Unified Manger backup
- How to collect data to troubleshoot OnCommand Plug-in for Microsoft
- How to collect files for troubleshooting using the Create Support Report feature
- How to collect logs (Support Bundle) from Active IQ Unified Manager installed on either a RHEL/Centos or Windows Host
- How to collect logs for 3.x versions of (offbox) OnCommand System Manager
- How to collect logs from Netapp SMI-S Provider
- How to collect OnCommand System Manager logs from Clustered Data ONTAP 8.3 or later
- How to collect troubleshooting data from OnCommand Insight Server
- How to configure Common Access Card (CAC) authentication for NetApp OnCommand Insight
- How to configure Common Access Card (CAC) authentication for NetApp OnCommand Insight DataWarehouse
- How to configure LDAP authentication for OnCommand Insight and OnCommand Data Warehouse
- How to configure memory utilization for OnCommand Insight application components running on Microsoft Windows Server
- How to configure OCI Data Warehouse "informix" user in a domain?
- How to configure OnCommand Unified Manager notifications with Microsoft Office 365 Exchange
- How to configure ONTAP EMS Event Subscriptions in OnCommand Unified Manager / Active IQ Unified Manager
- How to configure thresholds and alerts for qtree quotas using OnCommand Unified Manager
- How to connect to OnCommand Workflow Automation database remotely
- How to correct SSH-based workflow errors between OnCommand Unified Manager 5.2.2P2 and Data ONTAP 8.2.5 (and prior) releases
- How to create and import a Certificate Authority (CA) signed certificate into OCI and DWH 7.2.X
- How to create and import a Certificate Authority (CA) signed certificate into OCI and DWH 7.3.X
- How to create and schedule OnCommand Workflow Automation application backup
- How to create a custom, read-only, ONTAP user, for Netapp SMI-S Provider
- How to create a custom role and user for OnCommand System Manager in ONTAP 9x
- How to create a Self Signed Certificate within OnCommand Insight 7.2.X installed on a Windows Host
- How to create a Self Signed Certificate within OnCommand Insight 7.3.X installed on a Windows Host
- How to customize the e-mail address that DFM uses for alert messages
- How to customize the user quota alert e-mail in Unified Manager
- How to disable SSLv2 and SSLv3 in OnCommand Unified Manager Core Package 5.2.1GA for CVE-2014-3566
- How to enable and configure OnCommand Insight (OCI) AutoSupports
- How to enable DEBUG logging on OnCommand System Manager before signing in
- How to enable http access to OnCommand System Manager 9.0 and later
- How to exclude alerts for OnCommand Unified Manager for Clustered ONTAP and OnCommand Unified Manager
- How to find system information in OnCommand Insight 7.x
- How to find the LDAP User and Group Base DN for Microsoft Active Directory for use with the OnCommand applications
- How to generate and convert a signed certificate for OnCommand Unified Manager and Performance Manager
- How to gracefully stop and restart the NetApp MetroCluster Tiebreaker software
- How to import a Cognos Certificate Authority (CA) signed certificate into DWH 7.3.2 and prior
- How to import a Cognos Certificate Authority (CA) signed certificate into DWH 7.3.3 and later
- How to import Cognos Reports in OnCommand Insight's Data WareHouse (DWH) Cognos reporting engine
- How to import custom reports to IBM Cognos Analytics in OnCommand Insight
- How to login to System Manager using Active Directory groups
- How to manually generate an OnCommand Unified Manger backup
- How to migrate Oncommand Insight DWH server 7.3.2 CA (certified authority) certificate to a newer version of application
- How to migrate Oncommand Insight DWH server 7.3.3 and above CA (certified authority) certificate to a newer version of application
- How to modify the polling interval in Unified Manager versions 7.2 and later?
- How to monitor time skew using OnCommand Unified manager
- How to obtain a license key of OnCommand Unified Manager Core Package
- How to plan a reboot of the OnCommand Insight host
- How to rectify performance issues using monitoring tools
- How to reset the maintenance user password in OnCommand Unified Manager or OnCommand Performance Manager
- How to reset the password for your MySQL database
- How to restore an Active IQ Unified Manager 9.x application backup
- How to save Data Warehouse IBM Cognos reports to a local drive for DWH 7.3.0 to 7.3.2
- How to save Data Warehouse IBM Cognos reports to a local drive for DWH 7.3.3 and later
- How to save Data Warehouse IBM Cognos reports to a network drive for DWH 7.3.3 and later
- How to set up e-mail notification in Cognos Data Warehouse for Oncommand Insight
- How to start a new Incremental Backup chain within ActiveIQ Unified Manager versions 7.2 through 9.6
- How to troubleshoot OnCommand Insight installation failures
- How to troubleshoot SNMP communication by using SNMPwalk
- How to troubleshoot when ActiveIQ Unified Manager fails to alert 'X' condition
- How to upgrade OnCommand Unified Manager for clustered Data ONTAP
- How to upgrade VMware Tools in an OnCommand vApp/OVA
- How to use IBM Cognos configuration application edit “Supported ciphersuites” setting to remove 3DES”
- How to use the command line to generate a report with OnCommand Unified Manager Core Package
- Hyper-V data source performance acquisition failed with error "VMResourceMetering is not enabled on any virtual machine"
- Impact of "Microsoft Security Advisory ADV190023" for Remote Authentication using LDAP
- Import of Quota Management pack in WFA fails "The supported version from which a .dar file can be imported is 4.2 or later"
- In-place upgrade of OnCommand Workflow Automation 5.0.1 to 5.1 fails while creating the WFA database backup
- OnCommand Insight Data Warehouse 7.3.3 through 7.3.9, installation fails at "Starting Reporting Engine" step, with error "There is a problem with this Windows Installer package"
- Installation of OnCommand Workflow Automation 5.1RC1 hangs
- Install OnCommand Insight 7.3.7 or earlier with the MySQL certificate expired
- Internal error HTTP 500 when adding ONTAP Metrocluster to OnCommand Insight
- Inventory failed on OnCommand Insight 7.3.x, New Disk Type detected: STKTSNI3 CLAR300
- Invoke-NcSSH does not work after upgrade to OnCommand Workflow Automation 5.1
- In OnCommand System Manager, what is the volume "Over Provisioned Space"?
- IOPS and latency data missing when VMware vCenter is added to Active IQ Unified Manager
- Issue to configure LDAP on OnCommand Insight DWH
- Is it possible to adjust the retention or disable collection of performance data in OnCommand Unified Manager 7.2 or later?
- Is it possible to change inode (files) for volume via OnCommand System Manager?
- It fails to download ONTAP image from local host via OnCommand System Manager
- Error " java.lang.NullPointerException" seen when trying to restore files/directory within OnCommand Unified Manager
- Java client on OCI server cannot launch
- LDAPS configuration not working in WFA 5.1RC1
- LDAPS users cannot authenticate on OCI
- LDAP users can log into OnCommand Insight without providing a password
- Logging into OnCommand Insight Data Warehouse Cognos fails with "DWH API error"
- Logging into OnCommand Insight Data Warehouse Cognos fails with "Failed to read DWH API response"
- Message with null appears when attempting to remove or change properties for a LDAPS server in WFA
- NetApp Data Source acquisition fails with "The admin password is not set. Use the "security login password"" in OCI
- NetApp OnCommand Insight acquisition of a EMC Data Domain array fails with "Could not find ^---.*"
- Adding a storage system in NetApp SMI-S fails with error "CIM_ERROR_FAILED: Filer return: Can't connect to host (err=10061)"
- NetApp SMI-S Provider does not see disks for ONTAP system
- NetApp SMI-S Provider to ONTAP commands fail with "insufficient privileges" error
- New WFA 5.1 fails to complete install
- OnCommand Unified Manager events "Node To FC Switch All FC-Initiator Links Down" and "Node To FC Switch All FC-VI Interconnect Links Down"
- No alerts or events from ActiveIQ Unified Manager for volumes when “Volume Space Full” event is breached
- OnCommand Insight Data Domain data source fails with Internal error: No enum constant com.onaro.sanscreen.acquisition.schema.odata2.Disk.DiskType.SASe
- No performance data is shown in UM for one of the monitored clusters, because the ccma archive cannot be downloaded.
- OCI: Brocade Datasource fails with error : Invalid Chassis Role
- OCI: DWH does not install due to GPO
- OCI: DWH fails to install due to password complexity within Windows local policy
- OCI: DWH fails to install due to remnants on the file system
- OCI: Export report in Excel Data format shows not all data
- OCI - DWH connector issue. ETL is timming out.
- OCI : DWH fails to install due to low diskspace
- OCI : DWH fails to install on Windows
- OCI : foundation acquisition on a NetApp datasource fails due to read time out
- OCI : StorageGRID uses the name instead of the ID as a delimiter
- OCI Brocade data source is unable to poll for inventory data with the message " The Fabric is busy"
- OCI Brocade Inventory collect failure for a brocade datasource. The error message is 'no fabric'
- OCI datasource fails with error of internal error or NullPointerException
- OnCommand Insight NetApp Clustered Data ONTAP data source fails inventory collection, error: "Unexpected failure parsing 'lun-get-iter' ZAPI response during 'lun-info': , Empty key argument"
- OnCommand Insight's Data Warehouse(DWH) Extract, Transfer, and Load (ETL) process fails with an "Invalid Server Database" error
- The OnCommand Insight Data Warehouse service "Informix IDS - ol_cognoscm" fails to start with the error message: "The user name or password is incorrect."
- OCI DWH : Unable to start Cognos service due to metadata file runs out of space
- OCI DWH fails to install due to non English system local settings
- OnCommand Insight Data Warehouse report fails with Error: RSV-SRV-0040 The report server encountered an internal error. Due to Java Heap Space
- OCI DWH throws an error "TypeError: _QRF is null" when opening or editing a report
- OnCommand Insight EMC Solutions Enabler datasource Fails with error "Failed to execute Sym CLI symcfg because A requested network service was not found in the service file"
- OnCommand Insight DataWarehouse fails to restore backup with error 'The user specified as a definer ('username') does not exist'
- OCI foundation acquisition fails for Hyper-v datasource : Method Invocation Error
- OCI health page reports Anomaly Detection Engine: "ERROR: Failing to monitor job(s)"
- OCI Inventory collection problem with IBM SVC datasource due to "Internal error"
- OCI is unable to start services using systemctl or the oci-services.sh script
- OnCommand Insight Java client fails to launch with error message: javax.net.ssl.SSLHandshakeException: Received fatal alert: handshake_failure
- OnCommand Insight Pure data source fails inventory, error: "failed to respond: DELETE https://X.X.X.X:443/api/1.4/auth/session"
- OCI Service failed to start "Address already in use: bind /0:0:0:0:0:0:0:0:443"
- OCI stops to collect SolidFire performance data
- OnCommand Insight throws error when collecting from Nimble Data Source "Bad credentials, fail to log in with error message: Missing type of disk: null"
- Adding new hosts to the Anomaly Detection Engine in OnCommand Insight throws this error: anomalydetectionengine.jog:failed to create filter
- OCI WebUI produces a '404 Page Not Found' error and the performance acquisition for all data sources are failing
- OnCommand Insight web interface displays "This site can't be reached" due to expired certificate on Saturday, September 21st 2019
- OnCommand Insight web service goes down and remote acquisition units are unable to connect, server.log error "Failed to get health data with Health profiler"
- OCI / CI : Cloud Volumes Services datasource fails with : failed: Connection refused
- OCPM installation failed to create OCPMDB
- OCPM reports incorrect latency values after ONTAP 9.7 upgrade
- OnCommand System Manager 3.X Cannot Connect to 7-Mode Storage via TLS. Error: Storage System is not Configured for Secure Management with TLS
- OnCommand System Manager displays "Invalid or incomplete XML received due to communication error or character encoding errors"
- OnCommand System Manager displays error: "license is not available" when attempting to create a SnapVault or SnapMirror relationship
- OnCommand System Manager fails with message Data ONTAP API Failed No release-able destination found that matches those parameters
- OCUM 5.x: HTTP/HTTPS communicationfails with error due to incorrect CA configuration on ONTAP
- OCUM cannot update server update TaskException 68-132-983
- OCUM fails to monitor a cluster having an empty failover group
- OnCommand Unified Manager for Clustered ONTAP fails to gather performance due to Error: Server returned HTTP response code: 401
- OCUM is unable to collect performance data when archiver files are not generated at the same time
- OCUM might fail to monitor a cluster after setting new password for the cluster data source
- OnCommand Unified Manager on Red Hat Enterprise Linux fails to install: "netapp-platform-base package is installed, but in corrupt state"
- OnCommand Insight Data Warehouse ol_cognoscm service fails to start, with error "The system cannot find the file specified"
- OnCommand API Services 2.2 installation fails with error "Table 'netapp_model.param' doesn't exist"
- OnCommand API Services fails to start, web interface and APIs unavailable after security patching
- OnCommand Application installation fails to start Server Services due to port conflict with World Wide Web Publishing service
- OnCommand DataWareHouse 7.3.8 becomes unresponsive after a failed backup
- OnCommand Data WareHouse 7.3.3 or later services will not start after host reboot
- OnCommand Insight(OCI) Hyper-V datasource performance polling fails with "WinRm cannot process the request"
- OnCommand Insight. How to collect Troubleshooting Logs for Data Warehouse
- OnCommand Insight: Datasource polling fails with "Decryption Failure"
- OnCommand Insight: EMC ECS - How to view the ECS serial number in OCI
- OnCommand Insight: HTTP 404 Error seen in the web interface after rebooting or restarting services
- OnCommand Insight: IBM IHS version is not compliant. Current Version: 9.0.5.1 and new version need to be 9.0.5.3
- OnCommand Insight: VMAX storage group names not reported for VMAX 1k, 20k and 40k
- OnCommand Insight: What are the Brocade CLI/SSH commands run by the Brocade CLI Data Source?
- OnCommand Insight: What are the Fibre Channel Switch commands for troubleshooting switches?
- OnCommand Insight - All Data Sources fail acquisition with "Internal Error: Error" message
- OnCommand Insight 7.3.9 OnCommand Insight Client(java) fails to launch with "This app can't run on your PC"
- OnCommand Insight 7.3 or later services will not start after host reboot
- OnCommand Insight 7.x does not support devices using certificates with RSASSA-PSS signatures
- OnCommand Insight 7.x inventory fails with error: Certificates do not conform to algorithm constraints
- OnCommand Insight Backups Fail due to a Lack of Space
- OnCommand Insight Brocade data source inventory acquisition did not run for more than 1 hour
- OnCommand Insight Brocade Network Advisor data source fails with "Internal error: Malformed WWN:"
- OnCommand Insight Cognos reporting shows no reports after rebooting the server
- OnCommand Insight DataWarehouse backups fail due to a transaction timeout
- OnCommand Insight DataWarehouse needs to be rebooted frequently due to ETL maintenance tasks taking too long
- OnCommand Insight DataWarehouse Server shows "Rekey Failed!" error message when trying to Change Encryption Keys
- OnCommand Insight data source reports 'New Disk Type detected' error
- OnCommand Insight Data Warehouse 7.3.x install fails due to the Informix services not getting created
- OnCommand Insight Data Warehouse backup fails, error: "Failed to connect to reporting server"
- OnCommand Insight Data Warehouse build jobs are continuously skipped
- OnCommand Insight Data Warehouse Extract, Transform, and Load (ETL) fail due to a full table in the MySQL database
- OnCommand Insight Data Warehouse reporting portal login attempts result in error "Failed to read DWH API response"
- OnCommand Insight Data Warehouse scheduled reports remain in "Waiting" status
- OnCommand Insight Data Warehouse shows Invalid Server Database for a connector state
- OnCommand Insight Data Warehouse WebUI becomes unavailable due to wildfly scheduler issue
- OnCommand Insight displays incorrect ‘Array Name’ for EMC Clariion and VNX Block arrays
- OnCommand Insight does not show ISCSI end-to-end path for 7-mode data sources
- OnCommand Insight domain authentication fails due to a password error with the bind account
- OnCommand Insight DWH backups or phonehomes fails, error: "Failed to connect to reporting server"
- OnCommand Insight E-Series datasource Inventory status "Error connecting: Failed to connect to device"
- OnCommand Insight Elasticsearch Service and Best Practices
- OnCommand Insight EMC ECS data collection fails with keycache error
- OnCommand Insight EMC Isilon (SSH) data source fails with "Internal error : Sudo command run permission issue"
- OnCommand Insight error when attempting to import a signed certificate
- OnCommand Insight fails to connect to an Amazon Web Services (AWS) datasource
- OnCommand Insight fails to restore performance archives
- OnCommand Insight HPE XP8 storage array datasource not polling performance
- OnCommand Insight HyperV data source fails with error "Method invocation error"
- OnCommand Insight IBM Flash Array fails to report disk speed after SP8 installed
- OnCommand Insight is unresponsive because Elasticsearch is out of memory
- OnCommand Insight Java client does not show any switches for selection when adding a task action
- OnCommand Insight Java Client refuses to connect if using a self-signed certificate
- OnCommand Insight Key Cache Exception when trying to delete a Data Source
- OnCommand Insight MySQL upgrade required due to Security Vulnerability
- OnCommand Insight Performance Archive fails with error: "Archive file not found or not accessible"
- OnCommand Insight query for Virtual Machines shows Memory as "N/A"
- OnCommand Insight receiving error "Java heap error"
- OnCommand Insight Server fails with "Rekey Failed!" error when trying to change acquisition unit encryption keys
- OnCommand Insight services are up but licenses cannot be loaded and all datasources are failing
- OnCommand Insight Services will not start after Java update
- OnCommand Insight shows "Unable to obtain unique ID for host" error when acquiring from EMC VMAX data source
- OnCommand Insight VMWare data source fails inventory with Inconsistent data retrieved - Host host-[number] has the same host adapter node WWN[wwnNumber] as host host-[number]
- OnCommand Insight VPLEX data source fails inventory with Inconsistent data retrieved - Cannot find front-end port
- OnCommand Insight WebUI search takes a long time, produces a '404 Page Not Found' error, and other performance issues due to failed ElasticSearch indexing
- OnCommand Insight WebUI login fails due to excessive authentication requests
- OnCommand Insight zapi call fails with "Unable to create zapi iterator index file" due to "No space left on device"
- OnCommand Insigt 7.3.3 - after applying Patch 7 the latency graph of several inventory objects stopped
- OnCommand Performance Manager 1.0 can no longer monitor a cluster
- OnCommand Performance Manager reports "Max Data Disk Utilization" when the data is not being accessed on the aggregate
- OnCommand Plugin for Microsoft fails on any Management Server tasks with "The system cannot find the file specified"
- OnCommand System Manager '500 Connection timed out'
- OnCommand System Manager (OCSM) does not launch
- OnCommand System Manager 3.X Cannot Connect to 7-Mode Data Ontap After Upgrading Java Above version 8u171
- OnCommand System Manager 3.x Displays: Error 500 Connection Refused, when Displaying SnapMirror or SnapVault details
- OnCommand System Manager 3.X unable to Connect to 7-Mode Data Ontap via HTTPs, Max number of HTTPs Connections
- OnCommand System Manager 9.0 and newer report administratively down interfaces under the Dashboard
- OnCommand System Manager 9.3+ SAML authentication is not working with Active Directory Domain Groups
- OnCommand System Manager displaying ports down while they are administratively down and not broken
- OnCommand System Manager displays browser message This page can not be displayed
- OnCommand System Manager displays error message: Unable to launch browser
- OnCommand System Manager does not modify job schedule to "Daily"
- OnCommand System Manager fails 'SNMP Test Trap Host'
- OnCommand System Manager in the status column on the home page reports "No SNMP Response"
- OnCommand System Manager becomes unresponsive after entering user credentials with the message "Loading system details..." in webUI
- OnCommand System Manager login/authentication issues
- OnCommand System Manager reports an aggregate as offline or restricted when the aggregate is online
- OnCommand System Manager was not reachable after a failover took place because of a node failure
- OnCommand Unified Manager: Observed aggregate over-commit warnings
- OnCommand Unified Manager "um cli login" command is not working
- OnCommand Unified Manager (Cluster Mode) backup jobs fail when CommVault Simpana runs aux copies
- OnCommand Unified Manager - cluster discovery fails using ONTAP 9.3 with QUAD_PATH and QUAD_PATH_HA configured
- OnCommand Unified Manager - What is node resources overutilized and how to address it?
- OCUM 5.x: HTTP/HTTPS communicationfails with error due to incorrect HTTPS/TLS configuration on ONTAP
- OnCommand Unified Manager 5.x alerts on an expired certificate
- OnCommand Unified Manager 6.x/7.x: Too Many Open Files Error / Auxcopy /
- OnCommand Unified Manager 7.x fails to purge "unified-manager.xxxxxx" binlogs
- OnCommand Unified Manager Acquisition Service on Windows host, fails to start after install
- OnCommand Unified Manager aggregate capacity commitment calculation
- OnCommand Unified Manager authentication using Active Directory fails after upgrade
- OnCommand Unified Manager backups fail with error "Unable to find destination Storage Virtual Machine Association"
- OnCommand Unified Manager backup archive running out of disk space
- OnCommand Unified Manager Core not updating Quota Reports
- OnCommand Unified Manager Core Package error "HTTP POST - Authorization failed"
- OnCommand Unified Manager Core Package for 7-mode systems (DFM) is showing "Management Station: Load Too High" Event
- OnCommand Unified Manager Core Package server hangs due to parallelism
- OnCommand Unified Manager Core Package unable to increase value more than 65535 for aggrNearlyOvercommittedThreshold
- OnCommand Unified Manager dashboard shows "no data to display"
- OnCommand Unified Manager database corruption caused by Disk 3 (Data Disk) running out of Disk Space
- OnCommand Unified Manager data source object failing to refresh with error "Unable to invoke AU EJB"
- OnCommand Unified Manager error: The NetApp OnCommand Application Server service on Local Computer started and then stopped
- OnCommand Unified Manager error when attempting to import a signed certificate
- OnCommand Unified Manager event 'Database Backup Failed', 'Reason: Failed to create database backup using mysql utility'
- OnCommand Unified Manager fails subscribing to EMS events
- OnCommand Unified Manager fails to import a Microsoft CA signed certificate
- OnCommand Unified Manager for 7-mode systems (DFM) is unable to send emails for alerts
- OnCommand Unified Manager for cluster mode reports error: The cluster lacks spare disks on nodes
- OnCommand Unified Manager generates false "SVM stopped" event for DR SVM
- OnCommand Unified Manager is unable to complete discovery of a cluster due to duplicate serial numbers on shelf cables
- OnCommand Unified Manager is unable to schedule ‘Event’ report
- OnCommand Unified Manager maintenance user gets Error "Authentication Failed. Please verify Username and Password." for known good password
- OnCommand Unified Manager not sending alerts for all events
- OnCommand Unified Manager OVA boot failure due to file system inconsistency
- OnCommand Unified Manager Polling fails after cluster name change
- OnCommand Unified Manager read-only account privileges for clustered Data ONTAP
- OnCommand Unified Manager reports "Managed volume ' ' of subscribed volume ' ' is missing on node ' ' "
- OnCommand Unified Manager reports error message: RPM Unavailable
- OnCommand Unified Manager reports the cluster health status as "Degraded"
- OnCommand Unified Manager services don't start after importing a CA signed certificate
- OnCommand Unified Manager shows incorrect node utilization for nodes upgraded to ONTAP 9.4 or later
- OnCommand Unified Manager triggers an error message "No reservations found for aggregate" on backup jobs via Commvault
- OnCommand Unified Manager unable to abort a restore operation on time when abort is triggered from WebUI
- OnCommand Unified Manager upgrade to 7.3 fails with message 'Setup failed to start UM services'
- OnCommand Unified Manager warning alerts on high node utilization
- OnCommand Unified Manager will not authorize adding a cluster with HTTPS or switching to HTTPS
- OnCommand Workflow Automation data source acquisitions remains in "Scheduled" state
- OnCommand Workflow Automation install hangs when using a long password
- OnCommand Workflow Automation scripts fail after an AIX host update
- OnCommand Workflow Automation server is unavailable with error '404 not found'
- OnCommand Workflow Automation upgrade from 5.0 to 5.1 fails
- OnCommand Workflow Automation 5.0.1 installation failed in RHEL 7.6
- ONTAP 8.2.X data source failing performance collection with: "Object "system:constituent" was not found."
- ONTAP datasource failing with error Read timed out: lun-get-iter
- ONTAP System Manager sometimes displays "Unable to find API" pop-up errors
- OnCommand Performance Manager and OnCommand Unified Manager do not display latency or IOPs for all nodes in a cluster
- Performance collection fails on IBM SVC data source after microcode upgrade
- Quota email notification doesn't work in OnCommand Unified Manager when quota type is QTREE
- Readonly login-role authentication creates popup in System Manager after upgrade to ONTAP 9.5
- Restore backup on OnCommand Insight/Data Warehouse remains always on state "Restore in Progress" when using Internet Explorer
- SAML authentication fails in OnCommand System Manager when using Azure AD
- SANscreen: How to configure LDAP for Active Directory
- SANscreen: Which are the ports used by OnCommand Insight?
- SANscreen Data Warehouse / OnCommand Insight Reporting: 404 error while inserting images in reports
- Unable to set a simple password for local CIFS using OnCommand System Manager even though 'is-password-complexity-required' option is false for the SVM
- OnCommand System Manager displays message: The storage system is not configured for secure management with TLS after upgrading to Java 8u65 and later
- SnapMirror relation is not detected in the OCI if destination is SVM-DR
- Socket timed out error on OnCommand Insight when acquiring a Data ONTAP datasource
- Some MySQL queries are failing with the timeout error in the OnCommand WFA server
- Starting a service in OnCommand Data Warehouse fails with "Error 2: The system cannot find the file specified"
- System Manager displays a default certificate instead of the cluster certificate when accessed from a node management LIF
- System Manager is unable to Add ONTAP Cluster, Window displays: Retrieving System Details
- The build from history fails on OnCommand Insight Data Warehouse
- The Cognos service does not start after an upgrade of OnCommand Data Warehouse
- The error 'DPR-ERR-2056 The Report Server is not responding' appears when running a custom report against a custom database
- The LAU IP address does not update to a new OCI server IP after a restore
- The license consumption in OnCommand Inisght did not decrease after deleting a datasource
- The OCI datasource test times out when testing a Hyper-V connection
- The OnCommand DataWarehouse connector ETL process from the OnCommand Insight server does not complete
- The OnCommand Insight Java client does not launch twice in a row
- The OnCommand Insight vulnerabilities report shows the masked volumes multiple times
- The OnCommand Unified Manager -SnapProtect data protection storage service name is locked by another operation
- The PerformanceArchive process failed after importing the PerformanceArchive files in OnCommand Insight
- The proxy server timed out waiting for the ontapi server at address 127.0.0.1
- This SVM is in locked state, OnCommand cannot manage a locked file. To manage the SVM, unlock the SVM using command line interface
- Error on CDOT cluster audit-mlog: Unable to find API ldap-check-get-iter on node vserver
- Unified Manager for clustered Data ONTAP is unable to update cluster data with ERROR: "cannot update server" or "INTERNAL_ERROR"
- OnCommand Unified Manager stops polling Cluster information due less than 10 percent free space on the installation drive root partition
- Unable to access OnCommand Insight Data warehouse Reporting portal, getting error "The page cannot be displayed"
- Unable to access Ontap System Manager via Node Management LIF or Data LIF
- Unable to access the OnCommand System Manager due to "PR_END_OF_FILE_ERROR" error
- Unable to add Cluster with a garbled error when OCUM has insufficient disk space
- Unable to add the license keys in OnCommand Insight and fails with error: 'Invalid license'
- Unable to change qtree values in the configuration page of Insight DWH
- Unable to connect to ActiveIQ Unified Manager data source due to foreign key constraint in WFA 5.1
- Unable to delete cluster from OnCommand Unified Manager. The cluster removal process stuck displaying "Deletion" in the "Operation" field
- Unable to discover VMware Cluster in OnCommand Workflow Automation tool
- Unable to launch OnCommand Application with port 80 'Address already in use error: JVM_Bind'
- Unable to launch OnCommand System Manager even after restoring the 'SystemManager.config' file
- Unable to login to Data Fabric Manager using user with parenthesis in display name
- Unable to log into Oncommand Workflow Automation 5.1 after upgrade or restore
- Unable to log in to Unified Manager maintenance console
- Unable to re-key OnCommand Insight (OCI) Remote Acquisition Unit password encryption due to mis-matched encryption keys
- Unable to receive an alert in OnCommand Unified Manager 5.x for X event
- Unable to run a script with Active IQ Unified Manager
- Unable to send e-mails from DFM
- Unable to start DFM service with database service failed; error code is -100
- Unable to view alerts in 'Manage Alerts' tab due to platform.event.AlertResourceObject error
- Unable to view performance in OnCommand System Manager
- Unified Manager - MySQL log spamming, big error log of several GB
- Unified Manager alert configuration wizard displays MVD volumes in the volume Available Resources list
- Unified Manager doesn't display the correct volume information or aggregate capacity details
- Unified Manager shows "Null value was assigned to a property of primitive type setter" error message
- Unified Manager shows "The cluster is not reachable" error after an ONTAP upgrade
- Unified Manager upgrade fails due to MySQL service unable to start
- Unified Manager upgrade steps from 7.2.x/7.3.x/9.4.x to 9.5 version
- Upgrade from Unified Manager 7.3 to 9.4 or newer fails as migration of continuous_event_participant and continuous_event_participant_stats tables are large
- User sees "Incorrect username or password" or "Communication error" when logging into OnCommand Insight Java client
- User sees "Invalid username and password" when attempting to log in with LDAP credentials in OnCommand Insight UI
- Very high lun latency reported in OCUM 9.5 after upgrading to ONTAP 9.7
- VMware datasource poll fails on the OnCommand Insight(OCI) server
- VMWare Tools is not running on the Unified Manager Virtual Appliance
- Volume performance data is missing in DWH for specific EMC Symmetrix storage systems
- Volume performance data is not displayed in the OnCommand System Manager, error: "Workloads are not available for the volume"
- Web page becomes unresponsive when scrolling down a list within a workflow in WFA 5.1
- Web services are unresponsive on a node in a cluster
- WFA: dowloading logs is not possible as it gives a HTTP 404
- WFA 5.1RC1 - cannot authenticate users via LDAP/LDAPS
- WFA cannot connect to a OCUM 9.7P1 instance with the error: Connections using insecure transport are prohibited while --require_secure_transport=ON
- WFA 5.1 datasource acquisition fails with: Errcode: 13- Permission denied
- WFA 5.1 does not allow pattern credentials
- WFA 5 workflow execution fails on disconnect user CIFS session
- WFA : Can't peer UM 9.7x to WFA 5.1x because of internal error
- WFA download logs is unavailable with error "404 - Page not found"
- WFA install or upgrade fails with message that server service could not be started
- WFA table creation fails with the error: "Access denied for user 'root'@'localhost'" in OnCommand WFA Server
- WFA workflows sporadically fail with "Cannot run program "powershell" Access is denied" error
- WFA - Acquisition stopped working after installing SVM-DR Pack
- WFA custom workflows start failing after upgrading the cDOT pack to 9.5
- What actions can be performed when OnCommand Performance Manager alerts "is slow at the network processing node"?
- What are HTTP status codes in Unified Manager?
- What are the logs required to troubleshoot an OCI Java client issue, and what are their paths?
- What are the OnCommand Unified Manager (DFM) discovery issues and how can they be resolved?
- What data should be collected to troubleshoot OnCommand Unified Manager 5.x problems?
- What disks are in use with the Active IQ Unified Manager Virtual Appliance
- What is Performance Capacity in ONTAP 9 and OPM 7?
- What is the default directory for OCUM support bundle log?
- What is the difference between Active IQ and Active IQ Unified Manager?
- What is the upgrade path for Unified Manager versions?
- When subscribing to EMS events within Unified Manager, "Applicable to Cluster" status shows “No”
- When using OnCommand Insight's Brocade Network Advisor datasource no performance is data collected
- Where do E-Series Datasources source their disk model information
- Why does OnCommand Insight / OnCommand Data Warehouse display Banner: "Security Risk: Default Encryption Keys Detected"?
- Why does OnCommand Insight show impossibly high spikes in storage IOPS for ONTAP data sources?
- Why does OnCommand Workflow Automation not send email notifications when the option is selected?
- Why does System Manager's New Experience timestamps for events not match the CLI?
- Why does OnCommand Unified Manager alerts on 'Out of Memory' condition when the total memory usage is less than 100 percent?
- Why does Unified Manager say a volume has 0 days until full when it is not full?
- Why HPE 3PAR free chunklet storage pools display values for total capacity in OnCommand Insight
- Why is an object's latency high when the ops/iops are low?
- Why System Manager doesn't display all of my Storage Virtual Machines in the Storage Virtual Machines window?
- Workflows in OnCommand Workflow Automation fail with an "invalid character" error
- Workflow Automation login fails with error "unable to authenticate"
- Workflow execution fails with the error: "Access denied for user 'wfa'@'localhost'" in OnCommand WFA server
- Workflow fails to run with mail enabled on WFA
- Wrong available space for volume in OnCommand System Manager
- System Manager
- No image available
